GRP sewer pipe for Seawater

GRP sewer pipe in two bores:

1.diameter 1200mm suitable for use with seawater ,UV stabilsed, pressure rated to 1bar, strength class SN10000.in lengths up to 12m except at headwalls where maximum length connected to headwall shall be 2.4m, generally with push-fit couplings allowing angular deflection up to 3deg and cast in masonry couplings with water bar atheadwalls, joints and couplings in accordance with manufacturers details

More Info as below-

***Total GRP Pipe requirement is 2790m

***Each Pipe size 12m

***Bonding connection required

***Strength Class SN-10000.

***Pressure rated 1bar.

***UV Stabilised

***Deflection up to 3 degree

***Suitable for use with seawater

***Temperature: Normal

***Material: Regular for GRP Pipe

1.CODES AND STANDARDS

The characteristics, types, dimensions, methods of testing, marking, inspection, and acceptance of materials and products manufactured must comply with European standards EN, DIN, ISO, or American AWWA and ASTM. – ISO 10639: International standard for plastic piping systems intended for the distribution of water with or without pressure. Glass fiber reinforced thermosetting plastics based on the unsaturated polyester resin (UP). – EN 1796: Plastic piping systems for the transport of water with or without pressure. Glass fiber reinforced thermosetting plastics (GRP) based on the unsaturated polyester resin (UP).

2.CALCULATION PARAMETERS

Type : Burried –

Rigidity : SN 10000 –

Resin type : polyester –

Temperature : ambiente

3.QUALITY ASSURANCE:

FGS Factory has a Quality Control department having obtained the ISO 9001: 2008 certificate since May 2005. FGS Factory is ISO 9001/2015, ISO 14001/2015 and ISO 45001:2018 certified by TÜV As part of this contract GCER undertakes to set up an L.O.F.C. (List of Manufacturing and Inspection Operations). This will allow the monitoring and management of all control phases specific to this case, from supplies to delivery of equipment These various checks, we will give you at the end of the case a manufacturer file including – Material certificates – The control reports on raw material: • Glass weight • Glass wettability – Manufacturing procedure.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site is registered on wpml.org as a development site.